3 x 150mm Fascia Capping Boards – Full 5 metres long
In general deliveries are within a few days excluding day of ordering + 1 day handling time if ordered outside working hours. Take a look at my feedback and you will see the majority of orders are received sooner than expected. If choosing an expedited delivery service such as the get it fast option you must call to confirm stock availability. Next day delivery still requires a day handling. If you order a faster service and it is not possible I will refund the postal fees in full.
150mm x 9mm x 5m Capping Board in white.
- Length 5m
- Height 150mm
- Thickness 9mm
Capping Board is our uPVC fascia solution that fits directly over the top of your existing boards to give you added protection and a clean finish. If you need to replace your boards you might want to look at our Replacement Fascia 18mm section.
- Stylish and cost-effective PVC-U boards designed to fit over existing timber fascias
- Standard or decorative ogee fascia board for direct fixing to existing sound fascia boards or plywood
- Designed for ease of fitting and low maintenance, with no painting required
- An attractive and easy to install solution for any replacement roofline project
Foam profiles / rigid profiles
BS1006 / 1990 Part A03 – Tests undertaken by BSI Testing for colour change resulted
in an actual classification of 4 / 5 (where 1= most change and 5 = least change).
Tested to BS476 Part 7:1997 Class 1 surface spread of fire. Woodgrain profiles do
not carry a fire rating.
Tested to BS476 Part7:1997 Class 1 surface spread of fire.
Foam profiles 0.07 (w/mk)
This low coefficient of thermal conductivity for Foam Profiles indicates thermal insulation properties better than brick, concrete or timber.
Rigid profiles 0.14 (w/mk)
Foam profiles 0.55 – 0.6 g/cm3
Rigid profiles 1.40 – 1.50 g/cm3
Foam and rigid profiles should not require any further maintenance other than the occasional wash down with a non-scratch, mild detergent and water. They are resistant to most acids and alkalis but can be damaged by solvents. Great care should be taken when in contact with creosote or bitumen-based products as these will
cause staining of the profiles. Painting is not recommended on foam profiles unless done by an approved contractor.
Eurocell cellular foam PVC-U products are easy to work with using normal hand tools for drilling and cutting. It is recommended that the saw should have a fine tooth blade (PVC-U saws are available from Eurocell branches). PVC-U products should not be fitted below 0˚C as the boards may become brittle.
Handling and storage
Profiles are packed in polythene sleeves identifying a particular shade of white. Protective tape should only be removed immediately before installation to prevent damage.
The Eurocell Building Plastics products supplied by Eurocell Profiles Ltd are produced in accordance with a BS EN 1SO
9001:2000 accredited quality system.
Based on the technical testing information obtained from BSI, the white foam and rigid profiles are covered by a 20-year guarantee and foiled woodgrain foam and rigid profiles are covered by a 10-year guarantee on colour fastness, provided they are fitted to the manufacturers recommendations.
Delivery for the following postcodes may require an additional charge. Please check prior to ordering
AB31 AB32 AB33 AB34 AB35 AB36 AB37 AB38 AB41 AB42 AB43 AB44 AB45 AB51 AB52 AB53 AB54 AB55 AB56
FK19 FK20 FK21
HS1 HS2 HS3 HS4 HS5 HS6 HS7 HS8 HS9
IV1 IV2 IV3 IV4 IV5 IV6 IV7 IV8 IV9 IV10 IV11 IV12 IV13 IV14 IV15 IV16 IV17 IV18 IV19 IV20 IV21 IV22 IV23 IV24 IV25 IV26 IV27 IV28 IV30 IV31 IV32 IV36 IV41 IV42 IV43 IV44 IV45 IV46 IV47 IV48 IV49
IV51 IV52 IV53 IV54 IV55 IV56 IV63
KW1 KW2 KW3 KW5 KW6 KW7 KW8 KW9 KW10 KW11 KW12 KW13 KW14 KW15 KW16 KW17
PA20 PA21 PA22 PA23 PA24 PA25 PA26 PA27 PA28 PA29 PA30 PA31 PA32 PA33 PA34 PA35 PA36 PA37 PA38 PA41 PA42 PA43 PA44 PA45 PA46 PA47 PA48 PA49PA60 PA61 PA62 PA63 PA64 PA65 PA66 PA67 PA68 PA69PA71 PA72 PA73 PA74 PA75 PA76 PA77 PA78
PH1 PH5 PH6 PH7 PH8 PH9PH10 PH15 PH16 PH17 PH18 PH19 PH20 PH21 PH22 PH23 PH24 PH25 PH26 PH30 PH31 PH32 PH33 PH34 PH35 PH36 PH37 PH38 PH39 PH40 PH41 PH42 PH43 PH44 PH49
SA POSTCODES (ALL) – Possible Extended Delivery Times (due to weekly rota)
ZE1 ZE2 ZE3